Regulating Pressure at The Nozzle Creates a Steady, Efficient Spray
Orbit's 4 in. Eco-Spray Head provides maximum spray head efficiency and consistency while conserving water. A pre-installed pressure regulator delivers a constant 30/40 PSI - the precise pressure at which spray nozzles operate best.
The professional series spray head is the premium offering in the Orbit irrigation sprinkler lineup. This pop-up spray head features a highly innovative pressure regulator which you can adjust from the bottom of the can before installation, or from the top of the can after installation, from 30 to 40 PSI. 30 PSI is recommended for spray nozzles while 40 PSI is recommended for multi-stream rotator nozzles. The wiper seal features an over-molded structural support that ensures long-term, smooth retraction and prevents water from blowing by the riser stem. The riser spring which creates the pop-up action is made of corrosion-resistant stainless steel for years of reliable operation. A ratchet mechanism in the riser stem allows you to adjust the direction of the spray after installation. The bottom of the can has an integral silt trap. The spray body inlet has standard 1/2 in. female pipe threads (FPT) which connect to Blu-Lock and Riser-Flex fittings, as well as 1/2 in. Schedule 80 PVC and cut-off risers. The flush cap allows you to blow debris out of the line before installing the nozzle (sold separately). The riser stem is compatible with all female-thread nozzles from Orbit, Hydro-Rain, and other major brands. For outdoor irrigation use with cold water only.
Highlights
Professional-grade pop-up spray body in 4in. riser stem heights (nozzle sold separately)
Pressure regulator is factory set to 30 PSI and is adjustable to 40 PSI
Over-molded structural support in wiper seal for highly reliable seal and retraction
Gravity-activated silt trap in bottom gives superior performance with dirty water
Corrosion-resistant stainless steel riser spring for years of reliable operation
Ratcheting riser stem allows fine-tuning of spray direction after installation
Flush cap allows you to blow debris out of the line before installing the nozzle (sold separately)
Compatible with Orbit, Hydro-Rain, Rain Bird, Hunter, and other major brands
Control with a B-hyve smart controller for optimum water conservation
Ratchet stem allows quick directional adjustments
FEATURES AND BENEFITS
Pressure Regulated Stem — PR models provide 30/40 PSI (2,1 - 2,8 BAR) to the nozzle, effectively preventing water wasting misting caused by unregulated high pressure.
Co-molded TPR, Pressure Activated Wiper Seal — Effectively reduces water waste by minimizing flow-by at system start-up.
Greater Strength — Almost 50% more cap material than the industries leading spray head brand.
Two-Piece Stem Ratchet Mechanism — Makes aligning spray pattern to landscape quick and effortless.
Stainless Steel Retraction Spring — Ensures reliable retraction and durability.
Constructed With High-Impact ABS — Engineering grade material provides flexibility and strength needed for years of reliable use in diverse environments.
Pre-installed Orbit® flush cap — Pull-tab design makes nozzle installation easy while directional flow path makes flushing quick and easy
Top performance and full flexibility nozzles — Orbit® or Hydro-Rain® HRN 200 adjustable arc nozzles rotate 0°-360°
OPERATION RANGE
Radius: 3' to 18’ (0.9 to 5.5 m) - Nozzles not included
