Living Wall™ jardin vertical vous permet de cultiver une diversité de plantes, légumes, herbes, fleurs annuelles, vivaces et autres.
Living Wall™ est conçu pour faire un jardin vertical facile à installer sur un balcon, une terrasse, les murs et clôtures.
L'ensemble Living Wall™ est conçu avec des supports de montage mural extensible d'où jusqu'à quatre grands et quatre petits pots peuvent être suspendus à la verticale.
L'ensemble inclut également un système d'arrosage goutte-à-goutte professionnel intégré pour fournir certaines quantités d'eau dans chaque pot.
Living Wall™ prend en charge un espace ouvert entre les pots et le mur, afin d'assurer la protection et la décoloration du mur exposé à l'humidité.
L'ensemble Living Wall™ est un nouveau concept de jardinage permettant le positionnement rapide, le montage et l'expansion des pots plantés verticalement. L'ensemble utilise des supports de montage, qui peuvent être attachés à n'importe quelle structure extérieure. Un mur vert de croissance, facile à monter.
Kit includes:
Location is important in growing a Living Wall™ vertical garden. Growing on a vertical surface means that the amount of full sunlight may be restricted. Review the location and planting type that should be planted in the selected location. Also, think about where your water source will be and how easily you can connect to the water supply line.
Determine what pattern you want to create and mount the wall mounting brackets accordingly. Due to the wall mounting bracket modular design, for best results and easy installation, start from left side and keep a space of between 12" to 18" (30 to 45 cm) between each level.
Once you have determined where your first wall mounting bracket is to be located, hold it against the wall and get it level. It is most important that you get it level if you are going to add more brackets, because a small level error may magnify as the line of wall mounting brackets grows longer. We recommend using a minimum of two screws per each mounting bracket and to utilize the two holes at the top, on the left and right of the DIG logo (see illustration). Each mounting bracket has eight holes but no more than two to four screws are needed. Use a screwdriver to mount the first bracket to the wall or structure using the screws provided.
If attaching to a solid wall made of brick or concrete, use a masonry bit to drill the holes.
Once a single wall mounting bracket is mounted, place an additional bracket and secure it to the first one; then continue mounting all other mounting brackets using the same method.