Plastic Residential Irrigation Valves
With a long history of safe, reliable performance, the ASVF anti-siphon valve is chosen more often by professionals than any other residential / light commercial anti-siphon valve on the market.
Built-in atmospheric backflow prevention in the ASVF assures that your drinking water will always be safe from contamination due to irrigation water backflow.
The Rain Bird ASVF valve provides problem-free operation so you’ll spend less time thinking about your irrigation system and more time enjoying your landscape.
- Pressure: 15 to 150 psi (1,0 to 10,4 bar)
- 075-ASVF Flow: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation® products application, use a 200 mesh filter installed upstream.
- 100-ASVF Flow: 0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation® products application, use a 200 mesh filter installed upstream.
- Ambient air temperature: Up to 125° F (52° C)
- 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
- 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
- Solenoid coil resistance: 38 Ohms
- Anti-siphon must be installed at least 6" (15,2 cm) above the highest point of water in the pipe and sprinklers it serves.
- No valve can be located downstream of the anti-siphon valve.
- UPC Sec. 1003 (2)
- For use in cold water only, less than 110° F (43° C)
- Anti-siphon valves must not be operated continuously for more than twelve (12) hours.
- Consult local codes.
Dimensions
- Height: 6 1/4" (15,8 cm)
- Length: 6 1/10" (15,5 cm)
- Width: 3 1/5" (8,1 cm)
